2800 Mounting Bolt Spacing Requirements

Mounting:
In order for the Outlaw package to mount on your car, your car must use the later ATE calipers and mount on spindles that use a 3.5" (89mm) bolt spacing (center to center).  Typically, 1750, 2.0L 105/115, and 101 Giulias (w/ Dunlop/Girling calipes) use this bolt spacing and are good for the adaptation. 
Earlier (1600) 105 cars with ATE and some Juniors used a 3" (76mm) bolt spacing, and the Outlaws will not match these cars.  The best way to mount Outlaws on these 3" cars is substitute spindles from a later car.  This is a simple and direct bolt in replacement.