DeDion Suspension
Price List

Tech Note: Why Ball Joints In DeDion Caster Arms

• Click on the thumbnail photos for a larger view, and then use your browser's Back button
• Automated shopping cart shipping charges are for Domestic shipping only. 
  International customers please inquire for shipping quotes.
  

Steering and
Suspension parts

Photo

Description

Performatek
Part #

Price
Per Kit

Add to
Cart

Tie Rod End, outer, for all
Alfetta, GTV6, Milano (75)

DDTO

Ball Joint, upper for
GTV6 and Milano (75)

DDBJ-U

Ball Joint, lower   for all
Alfetta, GTV6, Milano (75)

DDBJ-L

Inner tie rod   Milano (75)

DDTR-I

deDion front wheel bearing kit, complete.  Includes inner bearing, outer bearing, seal, pin.
For later cars w 29mm
spindle.

DDFWB

deDion front wheel bearing seal, price, EACH

DDFWB-S

deDion rear wheel bearing kit, left side

DDRWB - L

deDion rear wheel bearing kit, right side

DDRWB - R

Milano CV joint boot.
Custom made specifically
for Milano.

CVB-M

AGIP F33
Wheel bearing grease 12oz (340g).
Alfa Romeo recommends
data sheet

AGIPF33

Photo

Description

Performatek
Part #

Price
Per Kit

Add to
Cart

SZ30 dedion center pivot bearing kit.
No longer available from Alfa.
This kit is an exact reproduction.
Gives maximum control and response to
all throttle inputs.
First Kits arriving soon.
                      Inquire

DDSZ-30

Rod End watts link kit for Milano (75)
and any track car with exhaust exiting
forward of the rear axle.  Gives maximum
control and location of rear suspension.
GTV6 stradale version in final development.
                      Inquire

Pivot bearing presses into original pivot,
re-uses original washers and lock nut.

LInks are proper length for lowered cars.
Simple bolt in, using original hardware.
Track tested.

DDWL-RE

Rubber boot kit to seal and protect
link rod ends,  Kit of 4 for complete set.

DDWL-EB

33 mm Torsion Bar for
Alfetta, Giulietta and GTV6 to mid '85
For full race applications. Needs
Performatek custom Konis for
optimized max performance.
Typical matching rear springs are in the
300#/inch range.

PAGTB-33

orientation
installed

Torsion bar mount bushings
for Alfetta, GTV6 to mid '85.
OEM parts, NLA.

DDTBM

33 mm Torsion Bar for
Milano (75) all & GTV6 mid '85 on
For full race applications. Needs
Performatek custom Konis for
optimized max performance.
Typical matching rear springs are in the
300#/inch range.

PMTB-33

spring pics, yellow

Rear Springs to match big
torsion bars, available from
200#/inch to 500#/inch
in 25#/inch increments.
price/pair
Inquire

DDRR

reverse view
in GTV6

Adjustable coil spring seat for
rear race springs
priced per pair

ADJS

Koni Sport Shocks, Front, NEW.
Valved to match 33mm torsion bars.
Adjustable for rebound, in car. 
Price Each. Delivery 4-6 weeks ARO

KF-33

Koni Sport Shocks, Front, Rebuilt.
Requires your used Koni Sport shock
Valved to match 33mm torsion bars.
Adjustable for rebound, in car. 
Price Each. Delivery 4-6 weeks ARO

KF-33-R

Koni Sport Shocks, Rear, NEW.
Valved to match rear race springs.
Adjustable for rebound, in car. 
Price Each. Delivery 4-6 weeks ARO

KR-33

Koni Sport Shocks, Rear, Rebuilt.
Requires your used Koni Sport shock
Valved to match rear race springs.
Adjustable for rebound, in car. 
Price Each. Delivery 4-6 weeks ARO

KR-33-R

30 mm Torsion Bar for
Alfetta, Giulietta and GTV6 to mid '85
For full race appliations.  Possibly
for extreme street use - probably the
upper limit of what you can stand on
the street.
Uses Koni Sport or Bilstein shocks.
Typical matching rear springs are in the
225#/inch range.

PAGTB-30

orientation
installed

Torsion bar mount bushings
for Alfetta, GTV6 to mid '85.
OEM parts, NLA.

DDTBM

30 mm Torsion Bar for
Milano (75) all & GTV6 mid '85 on
For full race applications. Possibly
for extreme street use - probably the
upper limit of what you can stand on
the street.
Uses Koni Sport or Bilstein shocks.
Typical matching rear springs are in the
225#/inch range.

PMTB-30

spring pics, yellow

Rear Springs to match big
torsion bars, available from
200#/inch to 500#/inch
in 25#/inch increments.
price/pair
Inquire

DDRR

reverse view
in GTV6

Adjustable coil spring seat for
rear race springs
priced per pair

ADJS

27 mm Torsion Bar for
Alfetta, Giulietta and GTV6 to mid '85
Works best w/ uprated shocks such
as Koni Sport or Bilstein.
Typical matching rear springs are
DDLR-GT or DDLR-B..

PAGTB-27

orientation
installed

Torsion bar mount bushings
for Alfetta, GTV6 to mid '85.
OEM parts, NLA.

DDTBM

27 mm Torsion Bar for
Milano (75) all & GTV6 mid '85 on
Works best w/ uprated shocks such
as Koni Sport or Bilstein.
Typical matching rear springs are
DDLR-B or DDLR-GT..

PMTB-27

Linear rate lowering rear springs for
Milano & Alfetta berlina.  Diameters
identical to Alfa Romeo springs.

DDLR-B

Linear rate lowering rear springs for
GTV6 & Alfetta GT.  Diameters
identical to Alfa Romeo springs.

DDLR-GT

Linear rate lowering rear springs for
dedion chassis.  10.5" free length.
Requires adjustable seat to secure
and set very low ride height.
Inquire to discuss suitable rates & lengths.

DDLR-10.5

Linear rate lowering rear springs for
dedion chassis.  8" free length.
Requires adjustable seat to secure
and set very low ride height. Requires
fabrication of limit strap to prevent fall out
in full droop mode.
Inquire to discuss suitable rates & lengths.

DDLR-8

reverse view
in GTV6

Adjustable coil spring seat for smaller
diameter and shorter rear springs.
Will not work with oem diameters.
priced per pair

ADJS

Koni Sport Shocks, Front
All dedion chassis. Price Each.
excellent match for 27mm to 30mm
torsion bars

KDDF-S

Koni Sport Shocks, Rear
All dedion chassis. Price Each.
excellent match for 27mm to 30mm
torsion bars

KDDR-S

Bilstein Monotube Gas Shocks
Front, Alfetta & GTV6. Price Each.

BDDF-S

Bilstein Monotube Gas Shocks
Rear, Alfetta & GTV6.  Price Each.

BDDR-S

Bilstein Monotube Gas Shocks
Front, Milano (75).  Price Each.

BMF-S

Bilstein Monotube Gas Shocks
Rear, Milano (75).  Price Each.

BMR-S

27 mm Front anti sway bar for
all dedion chassis.

DDFB-27

Front anti sway bar mount
reinforcement. welding required

FRBM

25.4 mm rear anti sway bar for
GTV6, Alfetta GT.
Adjustable end link mounting for
chassis tuning.

DDRBGT-25.4

25.4 mm rear anti sway bar for
Milano (75).
Adjustable end link mounting for
chassis tuning.

DDRBM-25.4

End links for GTV6 style rear sway
bar.  Stock and DDRB-25.4
Complete kit of 2.

DREL

Caster Rod Ball Joint

PCBJ105

Caster Rod Ball Joint - Kit of 2

PCBJ105K

install instructions

DeDion / Caster Rod Adapter Kit

PCRS